Un parc solar sau eolian se finanțează, de cele mai multe ori, pe baza fluxurilor de numerar pe care le va genera — nu pe baza bilanțului sponsorului. Asta înseamnă că banca nu evaluează compania, ci proiectul. Iar proiectul, pentru bancă, este modelul financiar.
Când modelul ajunge la echipa de credit, aceasta nu îl citește de la prima foaie la ultima. Merge direct la câteva puncte pe care le-a văzut greșite de zeci de ori. Iată ce verifică primele.
1. Structura: poate fi urmărit modelul?
Primul test este unul de încredere. Un analist trebuie să poată urmări orice cifră din rezultate până la ipoteza din care provine.
- Ipotezele, calculele și rezultatele sunt separate. Toate datele de intrare sunt într-un singur loc, nu introduse direct în formule.
- Formulele sunt consecvente pe rând. Aceeași formulă pe tot rândul, fără excepții ascunse într-o singură coloană.
- Calendarul este clar. Perioada de construcție, data punerii în funcțiune și perioada de operare sunt definite prin indicatori de timp, nu prin coloane fixate manual.
- Nu există valori „lipite” peste formule, rânduri ascunse sau legături către fișiere externe.
Un model greu de urmărit nu este respins pentru că ar fi greșit, ci pentru că nu se poate demonstra că e corect. Pentru o bancă, rezultatul este același.
2. Producția de energie: de unde vine cifra?
Venitul unui proiect regenerabil depinde aproape în întregime de câtă energie produce. Banca va întreba:
- dacă producția se bazează pe un studiu independent de randament energetic, cu valori P50 și P90;
- ce ipoteze s-au folosit pentru degradarea panourilor, disponibilitate și pierderi;
- dacă s-a ținut cont de limitările de injecție în rețea (curtailment) — un risc tot mai real și în regiunea noastră.
De regulă, datoria se dimensionează pe un scenariu prudent (adesea P90), nu pe cel mediu. Un model care arată bine doar la P50 nu este un model bancabil.
3. Prețul energiei: contract sau piață?
Banca vrea să știe ce parte din venit este sigură. Un contract de vânzare pe termen lung (PPA) sau un mecanism de sprijin obținut la licitație înseamnă venituri previzibile. Energia vândută pe piață, după expirarea contractului sau în lipsa lui, este tratată mult mai conservator.
Modelul trebuie să arate clar unde se termină contractul, ce preț se presupune după aceea și de unde provine acea curbă de preț.
4. Datoria: cât se poate împrumuta?
Aici banca își face propriile calcule, iar modelul trebuie să le permită. Elementele-cheie sunt:
- Gradul de acoperire a serviciului datoriei (DSCR) — de câte ori fluxul de numerar acoperă rata și dobânda, în fiecare perioadă. Băncile stabilesc un minim, iar datoria se dimensionează ca să-l respecte.
- Ponderea datoriei în costul total al proiectului (gearing).
- Durata creditului comparată cu durata contractului de vânzare și cu viața utilă a activului.
- Conturile de rezervă — de exemplu, rezerva pentru serviciul datoriei (DSRA) și cum se finanțează.
Dacă modelul nu calculează aceste indicatori transparent, banca îi va recalcula singură — și s-ar putea să ajungă la alte cifre.
5. Scenariile negative: ce se întâmplă dacă lucrurile merg prost?
Niciun comitet de credit nu aprobă un proiect doar pe baza scenariului de bază. Modelul trebuie să permită rapid teste precum:
- producție la P90 pe un an și pe zece ani;
- costuri de investiție mai mari (de exemplu, +10%);
- întârzierea punerii în funcțiune cu câteva luni;
- dobânzi mai mari;
- prețuri de piață mai mici după expirarea contractului.
Întrebarea nu este dacă proiectul rămâne profitabil pentru acționari, ci dacă datoria se mai rambursează. Un model bun arată asta într-un singur tabel de sensibilități.
Cum vă pregătiți
Înainte de a trimite modelul către bancă, merită trei lucruri simple:
- O notă scurtă despre ipoteze, cu sursa fiecărei cifre importante — studiul de randament, oferta EPC, contractul de vânzare, termenii creditului.
- O verificare internă a structurii și a formulelor, făcută de cineva care nu a construit modelul.
- Pentru tranzacțiile mari, un audit independent al modelului. Băncile cer adesea unul înainte de închiderea finanțării. Făcut din timp, scurtează procesul în loc să-l întârzie.
Modelul financiar nu este o formalitate de la final. Este documentul pe baza căruia banca decide dacă proiectul se construiește.
Grid Partners construiește și auditează modele financiare pentru proiecte de energie regenerabilă și infrastructură. Dacă pregătiți un proiect pentru finanțare, ne puteți scrie pentru o discuție.
Discutați despre modelul dvs.
← Toate articolele
A solar or wind farm is usually financed on the cash flows it will generate, not on the sponsor's balance sheet. That means the bank isn't assessing the company; it's assessing the project. And to the bank, the project is the financial model.
When the model reaches the credit team, they don't read it from the first sheet to the last. They go straight to a handful of points they've seen go wrong dozens of times. Here is what they check first.
1. Structure: can the model be followed?
The first test is one of trust. An analyst has to be able to trace any number in the outputs back to the assumption it came from.
- Inputs, calculations and outputs are separate. All inputs sit in one place rather than being typed into formulas.
- Formulas are consistent across each row. The same formula all the way along, with no exceptions hidden in a single column.
- The timeline is clear. Construction, commercial operation date and the operating period are driven by timing flags, not hard-coded columns.
- No values are pasted over formulas, and there are no hidden rows or links to external files.
A model that is hard to follow isn't rejected because it's wrong, but because nobody can show that it's right. For a bank, the outcome is the same.
2. Energy yield: where does the number come from?
A renewable project's revenue depends almost entirely on how much energy it produces. The bank will ask:
- whether production is based on an independent energy yield assessment, with P50 and P90 values;
- what assumptions were used for panel degradation, availability and losses;
- whether grid curtailment has been accounted for — a growing risk in our region too.
Debt is usually sized on a prudent case (often P90), not the average one. A model that only looks good at P50 isn't a bankable model.
3. Power price: contract or market?
The bank wants to know how much of the revenue is secure. A long-term power purchase agreement (PPA) or a support mechanism won at auction means predictable income. Power sold on the market — after the contract ends, or without one — is treated far more conservatively.
The model has to show clearly where the contract ends, what price is assumed after that, and where that price curve comes from.
4. Debt: how much can be borrowed?
This is where the bank runs its own numbers, and the model has to let it. The key elements are:
- Debt service coverage ratio (DSCR) — how many times cash flow covers principal and interest in each period. Banks set a minimum, and the debt is sized to meet it.
- Gearing — the share of debt in the total project cost.
- Loan tenor compared with the length of the sales contract and the useful life of the asset.
- Reserve accounts — for example the debt service reserve account (DSRA), and how it is funded.
If the model doesn't calculate these transparently, the bank will recalculate them itself — and may arrive at different numbers.
5. Downside cases: what happens if things go wrong?
No credit committee approves a project on the base case alone. The model needs to run tests like these quickly:
- production at one-year and ten-year P90;
- higher capital costs (for example +10%);
- commercial operation delayed by a few months;
- higher interest rates;
- lower market prices after the contract expires.
The question isn't whether the project stays profitable for shareholders, but whether the debt still gets repaid. A good model shows that in a single sensitivity table.
How to prepare
Before you send the model to a bank, three simple things are worth doing:
- A short assumptions note, with the source of every important number — the yield study, the EPC offer, the sales contract, the loan terms.
- An internal check of structure and formulas by someone who didn't build the model.
- For larger transactions, an independent model audit. Banks often require one before financial close. Done early, it shortens the process instead of delaying it.
The financial model isn't a formality at the end. It's the document the bank uses to decide whether the project gets built.
Grid Partners builds and audits financial models for renewable energy and infrastructure projects. If you're preparing a project for financing, get in touch for a conversation.
Discuss your model
← All articles
Солнечную или ветровую электростанцию, как правило, финансируют под будущие денежные потоки проекта, а не под баланс спонсора. Это значит, что банк оценивает не компанию, а проект. А проект для банка — это финансовая модель.
Когда модель попадает в кредитный отдел, её не читают от первого листа до последнего. Аналитики сразу идут к нескольким местам, где они уже десятки раз видели ошибки. Вот что они проверяют первым делом.
1. Структура: можно ли проследить логику модели?
Первая проверка — проверка на доверие. Аналитик должен суметь проследить любую цифру в результатах до исходного допущения.
- Допущения, расчёты и результаты разделены. Все входные данные собраны в одном месте, а не вписаны прямо в формулы.
- Формулы единообразны по строке. Одна и та же формула по всей строке, без исключений, спрятанных в отдельном столбце.
- Временная шкала понятна. Строительство, дата ввода в эксплуатацию и период эксплуатации задаются временными флагами, а не вручную зафиксированными столбцами.
- Нет значений, вставленных поверх формул, скрытых строк и ссылок на внешние файлы.
Модель, в которой трудно разобраться, отклоняют не потому, что она неверна, а потому, что невозможно доказать её правильность. Для банка результат один и тот же.
2. Выработка энергии: откуда взялась цифра?
Выручка проекта ВИЭ почти полностью зависит от того, сколько энергии он произведёт. Банк спросит:
- основана ли выработка на независимой оценке энергетического потенциала со значениями P50 и P90;
- какие допущения приняты по деградации панелей, коэффициенту готовности и потерям;
- учтены ли ограничения выдачи мощности в сеть (curtailment) — риск, который становится всё реальнее и в нашем регионе.
Долг обычно рассчитывают по консервативному сценарию (часто P90), а не по среднему. Модель, которая хорошо выглядит только при P50, — небанкабельная модель.
3. Цена энергии: контракт или рынок?
Банк хочет понимать, какая часть выручки гарантирована. Долгосрочный договор купли-продажи электроэнергии (PPA) или механизм поддержки, полученный на аукционе, означают предсказуемый доход. Энергию, продаваемую на рынке — после окончания контракта или без него, — оценивают гораздо осторожнее.
Модель должна чётко показывать, где заканчивается контракт, какая цена заложена после этого и откуда взята эта ценовая кривая.
4. Долг: сколько можно занять?
Здесь банк делает собственные расчёты, и модель должна это позволять. Ключевые элементы:
- Коэффициент покрытия обслуживания долга (DSCR) — во сколько раз денежный поток покрывает выплату основного долга и процентов в каждом периоде. Банк устанавливает минимум, и размер долга рассчитывается так, чтобы его соблюсти.
- Доля долга в общей стоимости проекта (gearing).
- Срок кредита в сравнении со сроком договора продажи энергии и сроком службы актива.
- Резервные счета — например, резерв на обслуживание долга (DSRA) и порядок его формирования.
Если модель не рассчитывает эти показатели прозрачно, банк пересчитает их сам — и может получить другие цифры.
5. Негативные сценарии: что будет, если что-то пойдёт не так?
Ни один кредитный комитет не одобряет проект только на базовом сценарии. Модель должна быстро проводить такие тесты:
- выработка на уровне P90 за один год и за десять лет;
- рост капитальных затрат (например, на 10%);
- задержка ввода в эксплуатацию на несколько месяцев;
- рост процентных ставок;
- снижение рыночных цен после окончания контракта.
Вопрос не в том, останется ли проект прибыльным для акционеров, а в том, будет ли погашен долг. Хорошая модель показывает это в одной таблице чувствительности.
Как подготовиться
Перед отправкой модели в банк стоит сделать три простые вещи:
- Короткую записку по допущениям с источником каждой важной цифры — отчёт о выработке, предложение EPC-подрядчика, договор продажи энергии, условия кредита.
- Внутреннюю проверку структуры и формул, которую проводит человек, не строивший модель.
- Для крупных сделок — независимый аудит модели. Банки часто требуют его до закрытия финансирования. Проведённый заранее, он сокращает процесс, а не затягивает его.
Финансовая модель — не формальность в конце пути. Это документ, на основании которого банк решает, будет ли проект построен.
Grid Partners строит и проверяет финансовые модели для проектов возобновляемой энергетики и инфраструктуры. Если вы готовите проект к финансированию, напишите нам — обсудим.
Обсудить вашу модель
← Все статьи